LED SS805
0.80" 5-Digit 16-Segment Display
- Overview
- Commands
- Samples
- On-Module Code
A 5-digit, 0.80" 16-segment alphanumeric display — unlike 7-segment, the 16-segment layout can show full letters and symbols, not just digits. Available as a counter or timer format in red or green. Drive each digit and segment with simple text commands over any supported interface; segment timing and digit multiplexing are handled on the module.
Common uses: short status messages, station displays, vintage-arcade scoreboards, scrollable text counters, and any project where letters matter as much as numbers but a full character display would be overkill.
Key features • 5-Digit 16-segment LEDs | Resources 📄 Schematics PID: 0x05000C |
Modules ship without cables to reduce waste. Some specialty boards include a USB cable; for the rest, see Cables to add cables to your order.
Commands this module accepts. See Samples for runnable code in popular host languages.
| Function | Description |
|---|---|
Init() | Initialize the module. Automatically called on power up. |
Seg16(i, s) | Draw a single s character (0 to 9) on i digit (from the right). |
Digit(n) | Draw 'n' number to LEDs. |
PrntChr(i, c) | Print an ascii c character (A to Z and 0 to 9) at i index (from the left). |
PrntStr(b1) | Print a string of ascii characters. |
Dot(i, v) | Draw dot at i index with v value (0 off, 1 on). |
DVer() | This driver version. |
Peek under the hood
The script below is this module's driver — it teaches the hardware how to respond to the commands listed above. It ships pre-loaded from the factory; most users never need to open it.
loading...
Example code that calls this module's commands from popular host languages.
New here? See Get Started to connect a module and send your first command.
- Python
- MicroPython
- JavaScript
- .NET
- Arduino
- MicroBlocks
loading...
loading...
loading...
loading...
loading...
This sample runs in MicroBlocks on a any host board that's connected/tethered to this module, or a chain of modules. This module keeps its official DUELink firmware and module driver and responds to commands from the connected MicroBlocks-running host. New here? See the MicroBlocks page.
There are two ways to use it:
Open the full sample — the complete project (the module's library plus a ready-to-run example) opens directly on the MicroBlocks website.
Add just the libraries to your own project — copy the link, then in your MicroBlocks project click Add Library → Cloud and paste it. This loads this module's libraries into your project without replacing your current work.
Copy Library LinkCode that runs directly on this module's MCU. See how On-Module Code allows modules to run standalone.
- Script
This example runs using the default DUELink Internal Engine using its Scripting Language, and it expects the module's driver to be loaded first, see the Commands Tab.
loading...
Ordering Info
| Product | Part Number | Price |
|---|---|---|
| DUELink LED SS805 (Red) | GDL-LDLEDSS805-C-R | $19.95 |