DuePico
Raspberry Pi Pico Adapter
- Overview
- Commands
- Samples
- On-Module Code
An adapter for the Raspberry Pi Pico that mounts the Pico on its back side and exposes every Pico pin on female headers. Built-in peripherals on the front — a 0.96" graphical OLED display, two user buttons, and a piezo buzzer — drive directly with simple text commands over any supported interface. The OLED uses the engine's Graphics library.
An on-board 800 mA regulator powers the Downlink chain independently of the Pico's 3.3 V rail. A USB-C connector is available for firmware updates — leave it disconnected when the Pico is the host.
With the USB connector and the on-board regulator, DuePico can also run as a standalone microcomputer without a Pico attached.
Key features • Raspberry Pi Pico Headers | Resources 📄 Schematics PID: 0x0A0003 |
Modules ship without cables to reduce waste. Some specialty boards include a USB cable; for the rest, see Cables to add cables to your order.
Commands this module accepts. See Samples for runnable code in popular host languages.
Peek under the hood
The script below is this module's driver — it teaches the hardware how to respond to the commands listed above. It ships pre-loaded from the factory; most users never need to open it.
loading...
Example code that calls this module's commands from popular host languages.
New here? See Get Started to connect a module and send your first command.
- Python
- JavaScript
- .NET
loading...
loading...
loading...
Code that runs directly on this module's MCU. See how On-Module Code allows modules to run standalone.
- Script
- Arduino IDE
This example runs using the default DUELink Internal Engine using its Scripting Language, and it expects the module's driver to be loaded first, see the Commands Tab.
loading...
See Arduino IDE page for more info.
loading...
Ordering Info
| Product | Part Number | Price |
|---|---|---|
| DUELink DuePico | GDL-ADDUEPICO-B | $14.95 |